|
3 Position Switch - Dual Channel
For Safe Local Control
APPLICATION
Enabling switches are manually operated control devices, intended for use by people working in
dangerous areas of the machine or installation, as a means of providing continuous local control.
The ANSI B11.19, ANSI/RIA R15.06, IEC, EN and NFPA 79 Standards require the use of devices such as these.
OPERATION
The enabling switch is a spring loaded 3 position device. The switch must be continuously held in the center
position to activate the local control. Releasing or furthering depressing the switch will end this control
function.
|
 
Standard Cable Length - 2 Meter
Other cable lengths available upon request |
|
| Features |
Approvals |
| Light activation force |
ISO 12100 / EN 292 |
| Repeatable activation point |
IEC 60204-1 / EN 60204-1 |
| Lightweight ergonomic design |
ISO 11161 / prEN 11161 |
| Built in magnet for temporary mounting |
ISO 10218 / EN 775 |
| Tamper resistant |
ANSI/RIA 15.06 |
| Technical Information |
|
| Maximum Switching Current |
3A |
| Maximum Switching Voltage |
125V |
| Impulse Voltage |
1.5 KV |
| Short Circuit Current |
50A, 125V |
| Electrical Life Endurance |
100,000 Cycles |
| Protection Rating |
IP 65 |
| Temperature Range |
30° to 160° F (0° to 70° C) |
Additional products are available from the manufactuer. Please call us with your application needs.
|
what's new
about us
contact us
download home 
