Non Contact Safety Switches
F-Series Switches
Monitored with F-Series Controller

Size: W = 52mm H = 28mm D = 14mm The increasing need for fast, safe access to hazardous areas has led to the use of more safety interlocked access points on machinery.  With the dinky safety switch it is now possible to interlock even the smallest guards with our reliable electronic safety system.   Like all Mechan safety switches, the dinky are designed for use in most environments. Available pre-wired with 5, 10 or 15 meter cables encapsulated into the ABS housing, the dinky safety switch is immune to water, hot hosing, dust or oil etc. and the small size makes it easy to hide or to use on very small access points.   8-10mm switching distance means that safety series are just as tolerant to misalignment and guard wear over their long operational life as the bigger F & B Type.

Size: W = 52mm H = 28mm D = 14mm For ease of installation and maintenance, Mechan can now offer the dinky safety switches with the option of an M8 quick disconnect.   Like the Pre-Wired version, the safety switch electronics are encapsulated into an ABS housing along with the Brad Harrison M8 connector.   The dinky, quick disconnect, safety switches can be ordered with 5 or 15 meter M8 cables.

Size: W = 34mm H = 75mm D = 34mm FMA switch is a totally encapsulated (IP67), fail safe, electronic safety switch that can only be operated by the Mechan Actuator. They are designed to work in the harshest of conditions, and with an 8-10mm switching distance, they are easy to install and tolerant to guard misalignment and wear. The cables up to 100 meters are possible, using Mechan specified cable or the switches can be purchased direct with longer cable lengths already encapsulated. There are tens of thousands of these safety switches being used around the world!

Size: W = 34mm H = 75mm D = 34mm The 'CMA' safety switches are uniquely coded versions of the standard F-Type and will work with any of the standard F-Series safety control units. With up to 500,000 unique codes available, they are ideal for situations where the highest security against tampering is required.  The CMA safety switch can also be used as a Master Key in a control panel to prevent start up when personnel are in dangerous areas. A MATCHING CONTROL MODULE OR EXTENDER MUST BE ORDERED WITH THE CMA SWITCH!

Page One | Page Two | Page Three | Page Four

Additional products are available from the manufacturer. Please call us with your application needs.